Chapter 7: Quantitative Measurements (LIA...) LB 9507
7-18
L53
COMMENT
You can enter a comment on the following measurement using
the alphanumeric keyboard. Confirm it with <enter>. If you do not
want to enter a comment, just press <enter>.
L57
REMOVE TUBE...
Remove the tube from the sample holder if there is one. This
display appears if there is a tube in the sample holder. So, if a
tube already is in the correct position before you start
measurement, you will have to lift the tube briefly. You will then
see:
L57a
INSERT TOTAL REPL. # 1 TUBE # 1
INSERT TUBE...
Position the first tube of the measurement series. The following
display appears:
L58
TOTAL REPL. # 1 TUBE # 1
START
Press the <start> button. The tube will move back into the
measurement chamber and the measurement will begin:
L59
BACKGROUND MEASURING...
A background measurement is performed, provided you have
defined one in the protocol.
L60
To Next Page
Loading...