LUMAT LB 9507 - Page 129

LB 9507 Chapter 8: T-Uptake/FTI-Measurements
8-9
T23
09: CONTROL 2 LOW LIMIT 0.000
LAST DISPLAY
Enter the lower limit for the 2nd control sample and press
<enter>.
T24
09: CONTROL 2 HIGH LIMIT 0.000
LAST DISPLAY
Enter the upper limit for the 2nd control sample and press
<enter>.
T25
09: EXP. RANGE LOW LIMIT 0.000
LAST DISPLAY
Enter the lower limit of the expected range (normal range) and
press <enter>.
T26
09: EXP. RANGE HIGH LIMIT 0.000
LAST DISPLAY
Enter the upper limit of the expected range (normal range) and
press <enter>.
T27
09: REPL. OF CAL./STD. (1-10) 1
LAST DISPLAY
Enter the replicate number of the standards (1 - 10).
T28
09: REPL. OF CONTROLS (1-10) 1
LAST DISPLAY
Enter the replicate number of the control samples (1 - 10),
assuming you have selected controls in display T19.