Chapter 5: Raw Data Measurements LB 9507
5-8
R18
06:KINETICS PRINTOUT CURVE YES
YES NO LAST DISPLAY
The measurement results can be printed in the form of kinetics
curve on the built-in thermal printer.
R19
06: INPUT ALL CORRECT ? YES
YES NO LAST DISPLAY
If you select <YES> the entered parameters are stored and the
program returns to the main menu (R1).
<NO> takes you back to the 1st display of this protocol (R5).
Note:
The protocol is not stored if you exit this protocol sequence via
<exit>!
To Next Page
Loading...