MacDon R113 - Checking Lights

214713 145 Revision A
7.15 Checking Lights
1015045
A
B
A
B
Figure 7.28: Standard Configuration
1. Check that lights (A) and (B) are properly located on the
disc mower to suit the setup configuration.
2. Check light mountings for security and damage.
3. Check operation of hazard lights (A) and brake
lights (B) during machine run-up.
1015108
A
A
B
B
Figure 7.29: Road Friendly Transport
™™
Configuration
PERFORMING PREDELIVERY CHECKS