214713 88 Revision A
4.9 Installing Options
Install the following optional kits if they were supplied with your disc mower.
4.9.1 Installing Hydraulic Center-Link (Optional)
The hydraulic center-link option is supplied in a separate shipment. Refer to the installation instructions supplied
with the kit.
4.9.2 Installing Tall Crop Divider (Optional)
The tall crop divider is supplied in a separate shipment. Refer to the installation instructions supplied with the kit.
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator’s seat for any reason.
IMPORTANT:
If disc mower will be transported on public roads in the Road Friendly Transport
™
mode, do not install the tall crop
dividers. Install the dividers after the machine is delivered to the customer.
ASSEMBLING THE DISC MOWER (FACTORY-INSTALLED TRANSPORT)
To Next Page
Loading...
