214713 8 Revision A
5. Take to storage or assembly area, and set hitch down securely on level ground.
6. Repeat for second hitch (if required).
7. Check for shipping damage and missing parts.
1015097
A
B
Figure 2.2: Unloading Disc Mower
8. Approach disc mower (A) from back with forklift (B) as
shown, and slide forks as far as possible into pallet.
NOTE:
Pallet is designed to be lifted from the backside only.
9. Raise disc mower off deck.
IMPORTANT:
Take care not to contact the other machine if load is
two-wide.
10. Back up until unit clears trailer, and slowly lower to
150 mm (6 in.) from ground.
11. Take to storage or set-up area, and set machine down
securely on level ground.
NOTE:
When possible, approach from the backside to
minimize potential for contacting the unit.
12. Repeat for second disc mower (if required).
13. Check for shipping damage and missing parts.
IMPORTANT:
Do NOT remove disc mower from pallet until instructed.
14. Unload remaining pallets and boxes, and take to assembly area.
UNLOADING TRUCK SHIPMENT
To Next Page
Loading...
