3-24
[2] AUTO-DESELERATION SWITCH
If the control levers are neutral, this switch (2) automatically lowers
the engine speed and returns on the function to reduce fuel
consumption.
• Monitor ON: Auto-deceleration ON
• Monitor OFF: Auto-deceleration OFF
Each time the switch is pressed, the auto-deceleration is switched
between ON and OFF.
[AUTO-DESELERATION FUNCTION]
When the auto-deceleration function is ON, if the work
equipment and travel levers are returned to the N position, the
engine speed drop after 4 seconds from the operating speed to
idling speed.
This makes it possible to reduce fuel consumption.
If any lever is operated when the machine is in this condition,
engine speed will return to the previous operating speed to make
it possible to perform operation.
1. When auto-deceleration switch (2) is pressed and the
auto-deceleration function is returned ON, the mode is displayed
in the center of the monitor display, and after 2 seconds, the
screen returns to the standard screen.
2. On the standard screen, the auto-deceleration monitor lights up.
When the auto-deceleration is OFF, it does not light up.
To Next Page
Loading...
