Maeda LC1385M-8BF - Page 95

3-31
[2] SERVICE METER/CLOCK DISPLAY SELECTOR SWITCH
• On the standard screen, it is possible to press the function switch
(F4) to switch the service meter and clock display at the top of the
monitor display.
• When the time is being displayed, press the function switch (F4)
to switch to the service meter display.
[3] MAINTENANCE MODE SELECTOR SWITCH
When function switch (F5) is pressed on the standard screen, the
monitor display screen switches to the maintenance mode screen.
The items on the maintenance display are as follows.
Maintenance items
Default maintenance
interval settings (h)
Engine oil change
500
Engine oil filter change
500
Fuel main filter change
1000
Fuel pre-filter change
500
Hydraulic oil filter change
1000
Hydraulic tank breather change
500
Damper case service
1000
Final drive case oil change
1000
Swing machinery case oil change
1000
Hydraulic oil change
5000
(a): Maintenance items
(b): Default maintenance interval
settings (h)
(c): Time remaining until mainte-
nance (h)