Mahr Digimar 817 CLM - Page 68

68
Mahr GmbH • Digimar 817 CLM
– Determine the tilting direction of the workpiece
(The tilting direction is defined from the point of view of the height
measuring instrument to the workpiece)
– Tilt to the right / clockwise
– Rotate to the left / anti-clockwise
– Select the type of rotation for the coordinate system
1. The transformation will be conducted without rotation of the
coordinates system.
Description / Sequence Symbols / Pictures
+

– Active the „coordinate transformation“ function
– Use the arrow keys to select bores 1 and 4, use the cursor to
adopt the character symbols A and B.
In bore 1 (A) lies the coordinate origin / zero point.
The X-axis (abscissa) runs through bore 1 (A) and bore 4 (B)
B
4
A
1