List of Spare Parts, Unrestricted Service
Engine control system, plate 4765-1901, 7072-1250,
7065-1100, 7072-1100, 4772-1550
1 and 2
)
1 Multi Purpose Controller MPC
1 Multi Purpose Controller MPC-10, if applied
1 Trigger sensor for tacho system (if trigger ring
is specified)
1 Marker sensor for tacho system
1 Tacho signal amplifier
1 IDkey
1 Encoder
1 Fuse kit
Starting valve, plate 3472-0200
1 Starting valve, complete
Hydraulic cylinder unit, plate 4572-0500 and others
1 and 2
)
1 Fuel booster barrel, complete with plunger
1 ELFI valve complete
1 Suction valve complete
1 Packing kit
Exhaust valve, plate 2272-0200, 2272-0240
2 Exhaust valves complete
(The 2nd exhaust valve is mounted in the Cylin-
der cover complete)
1 Exhaust valve complete. Only for GL
1 Highpressure pipe from actuator to
exhaust valve
Fuel valve, plate 4272-0200, 4272-0100
1 set Fuel valves of each size and type fitted, com-
plete with all fittings, for one engine
a) engines with one or two fuel valves: one set of
fuel valves for all cylinders on the engine
b) engines with three and more fuel valves per
cylinder: two fuel valves complete per cylinder,
and a sufficient number of valve parts, excluding
the body, to form, with those fitted in the com-
plete valve, a full engine set
1 set Highpressure pipe, from fuel oil pressure
booster to fuel valve
Turbocharger, plate 5472-0700
1 set Maker’s standard spare parts
Cylinder cover, plate 2272-0300
1 Cylinder cover with fuel, exhaust and starting
valves, indicator valve and sealing rings (disas-
sembled).
½ set Studs for 1 cylinder cover
Piston, plate 2272-0400
1 Piston complete (with cooling pipe), piston rod,
piston rings and stuffing box, studs and nuts
1 set Piston rings for 1 cyl.
Cylinder liner, plate 2272-0600
1 Cylinder liner inclusive of sealing rings and
gaskets. For all except GL
Cylinder lubricating oil system, plate 3072-0600
1
)
1 set Spares for lubricating oil system for 1 cyl.
2 Lubricator backup cable
Connecting rod, and crosshead bearing, plate 1472-0300,
2572-0200
1 Telescopic pipe with bushing for 1 cyl.
1 Crankpin bearing shells in 2/2 with studs and
nuts
1 Crosshead bearing shell lower part with studs
and nuts
2 Thrust pieces
Thrust bearing, plate 2572-0600
1 set Thrust pads for ‘ahead’.
For NK also 1 set ‘astern’ if different from
‘ahead’
Hydraulic power supply, HPS, plate 4572-1000, 1465-
0401, 4572-0900 and others
1 and 2
)
1 Proportional valve for hydraulic pumps
1 Claw coupling
1 Accumulator
6 Chain links. Only for ABS, LR, and NK
1 High-pressure pipe kit
1 set Flex pipes, one of each size. Only for S60ME-B
1 Electric motor
Spare parts are requested by the following Classes
only: GL, KR, NK and RS, while just recommended by:
ABS and LR, but neither requested nor recommended
by: BV, CCS, DNV and RINA.
Fig. 19.06.01a: List of spare parts, unrestricted service, option: 4 87 601
To Next Page
Loading...
Need help?
General
