Additional customised information can be obtained
from MAN Diesel & Turbo as project support. For
this purpose, we have developed the CEAS ap-
plication, by means of which specific calculations
can be made during the project stage.
The CEAS application
The CEAS application is found at
www.marine.man.eu → ’Two-Stroke’ → ’CEAS En-
gine Calculations’.
On completion of the CEAS application, a report
is generated covering the following:
• Main engine room data
• Specified main engine and ratings
• Ambient reference conditions
• Expected SFOC, lube oil consumption, air and
exhaust gas data
• Necessary capacities of auxiliary machinery
(SMCR)
• Starting air system, engine dimensions, tanks,
etc.
• Tables of SFOC and exhaust gas data
• Heat dissipation of engine
• Water condensation separation in air coolers
• Noise – engine room, exhaust gas, structure
borne
• Preheating of diesel engine
• Alternative engines and turbochargers, further
reading.
Links to related MAN Diesel & Turbo publications
and papers are provided, too.
Supplementary project data on request
Further to the data generated by the CEAS appli-
cation, the following data are available on request
at the project stage:
• Estimation of ship’s dimensions
• Propeller calculation and power prediction
• Selection of main engine
• Main engines comparison
• Maintenance and spare parts costs of the en-
gine
• Total economy – comparison of engine rooms
• Steam and electrical power – ships’ requirement
• Utilisation of exhaust gas heat
• Utilisation of jacket cooling water heat, fresh
water production
• Exhaust gas back pressure
• Layout/load diagrams of engine.
Contact MAN Diesel & Turbo, Copenhagen in this
regard.
Installation Data Application
To Next Page
Loading...
Need help?
General
