Man B&W S50ME-B9.3-TII - Page 317

MAN B&W 19.07
Page 2 of 2
MAN Diesel
MAN B&W ME-B engines 198 53 23-3.4
Exhaust valve, plate 2272-0200 and others
1 Exhaust valve spindle
1 Exhaust valve seat
½ set Oring exhaust valve/cylinder cover
4 Piston rings
½ set Guide rings
½ set Sealing rings
½ set Safety valves
1 set Gaskets and Orings for safety valve
1 Piston complete
1 Damper piston
1 set Orings and sealings between air piston and
exhaust valve housing/spindle
1 Liner for spindle guide
1 set Gaskets and Orings for cool. water conn.
1 Conical ring in 2/2
1 set Orings for spindle/air piston
1 set Nonreturn valve
Exhaust valve, plate 2272-0200
1 Sealing oil control unit
Exhaust valve actuator, plate 4572-0100
1 Hydraulic exhaust valve actuator complete for
one cylinder
Cooling water outlet, plate 5072-0100
2 Ball valve
1 Butterfly valve
1 Compensator
1 set Gaskets for butterfly valve and compensator
Fuel injection system, plate 4272-0500
1 Fuel oil pressure booster complete, for one
cylinder
1 Hydraulic cylinder unit
1 set Gaskets and sealings
1 Electronic fuel injection control valve
Fuel valve, plate 4272-0200
1 set Fuel nozzles
1 set Orings for fuel valve
3 Spindle guides, complete
½ set Springs
½ set Discs, +30 bar
3 Thrust spindles
3 Non-return valve (if mounted)
Fuel oil high pressure pipes, plate 4272-0100
1 High pressure pipe, from fuel oil pressure
booster to fuel valve
1 High pressure pipe from actuator to exhaust
valve
1 set Orings for high pressure pipes
By-pass valve, plate 4272-0030
1 By-pass valve, complete
1 Orings of each kind
Scavenge air receiver, plate 5472-0600
2 Nonreturn valves complete
1 Compensator
Exhaust pipes and receiver, plate 5472-0900
1 Compensator between TC and receiver
2 Compensator between exhaust valve and re-
ceiver
1 set Gaskets for each compensator
Auxiliary blower, plate 5472-0500
1 set Bearings for electric motor
1 set Shaft sealings
1 set Bearings/belt/sealings for gearbox (only for
belt-driven blowers)
Turbocharger, plate 5472-0700
1 Spare rotor for one turbocharger, complete
with bearing
1 set Spare parts for one turbocharger
Arrangement of safety cap, plate 3472-0900
1 set Bursting disc
Engine lubricating oil system, plate 4572-0800
1 set 6µ filter
Fig. 19.07.01b: Additional spare parts beyond class requirements or recommendation, option: 4 87 603
Note:
Plate numbers refer to Instruction Book, Vol. II/III containing plates with spare parts