Maintenance overview
5.2 Maintenance plans
16.08.2018
Maintenance manual 3 302 577 en 5 - 3
GMK7450
5.2 Maintenance plans
The descriptions for certain maintenance work for the maintenance plans D,
W, M 1 to M 12 and Y 2 to Y 10 are provided for
– the carrier in Chapter 7 and for
– the superstructure in Chapter 8.
References (chapter and page number) to the description of this mainte-
nance work can be found after the respective maintenance work for carrier
and superstructure.
The section titles
–of Chapter 7
Maintenance work on the carrier and
–of ´Chapter 8
Maintenance work on the superstructure
contain the abbreviation (D to Y 10) of the relevant mainte
nance plan for
better comprehension.
In addition to the Maintenance work
on the carrier and the Maintenance
work on the superstructure Chapter 6 also lists the Lubricants and consum-
ables:
– The designations of the oils/lubricants in accordance with
Lubricants list,
p. 6 - 2.
– The amounts as approximate values for oil a
mounts in litres (l)
(and US gallons (gal)) (the exact oil amounts can always be determined
by th
e oil level inspection holes, the oil dipsticks or the oil level indicators)
Lubricant applications list, p. 6 - 3.
H
Items that are only available with additional equipment are designated
accordingly in Chapter 7 and Chapter 8.
Maintenance work on the engines that goes beyond the daily and weekly
checks is o
nly partially described in this maintenance manual! When carry-
ing out such maintenance work, follow the instructions given in the accom-
panying
Engine manufacturer’s documentation.
To Next Page
Loading...
