MCCORMICK MTX Series - Page 73

Instruments and Programming
65
4
To reset a specific field area counter
(to zero) (Menu 1-3):
STEP 1
STEP 2
NOTE: The STAR (1) next to the field number
identifies which field is currently selected.
Once you have found the correct menu,
STEP 3
STEP 4
To view the total area worked (of all
fields, up to a maximum of nine)
(Menu 1-4):
STEP 1
STEP 2
STEP 3
Momentarily press the menu button to
enter the sub menu.
Use the UP button to scroll through the
sub menus until the correct menu is
displayed, as shown below.
momentarily press the menu button
again to enter the sub sub menu.The
scroll up/down symbol will appear next to
the current field selected.
Use the UP and Down buttons to scroll
through the sub sub menus until the
required field is found.
Momentarily press the menu button and
the area counter will zero, will return to
the sub menu and display the current
field selected.
1
Momentarily press the menu button to
enter the sub menu.
Use the UP button to scroll through the
sub menus until the correct menu is
displayed, as shown below.
Use the UP and Down buttons to scroll
through to the next sub menu.