MCCORMICK MTX Series - Page 77

Instruments and Programming
69
4
To view the current total distance
worked (Menu 2-2):
STEP 1
STEP 2
To reset the counter:,
To view the accumulative total distance
worked (Menu 2-3):
STEP 1
STEP 2
To reset the counter:,
Percentage Wheel Slip
(Menu 3)
This screen displays the actual wheel slip, (as a
percentage).
NOTE: To read wheel slip make sure the Slip Limit
Control is ON.
Momentarily press the menu button to
enter the sub menu.
Use the UP button to scroll through the
sub menus until the correct menu is
displayed, as shown below.
simply press the menu button and the
total area will zero.
Momentarily press the menu button to
enter the sub menu.
Use the UP button to scroll through the
sub menus until the correct menu is
displayed, as shown below.
simply press the menu button and the
total area will zero.
NOTE: When you reset the
accumulative total counter the current
total counter will also reset to zero.