MI 2893 / MI 2892 / MI 2885 Measurement methods
187
P
1
P
2
P
3
Q
1
Q
2
Q
3
S
1
S
2
S
3
S
v
Q
v
P
tot
Figure 152: Vector representation of total
power calculus
Figure 153: Arithmetic representation of total power
calculus
In table below summary of all power measurement is shown.
Table 137: Summary and grouping of the phase power quantities
Table 138: Power summary and grouping of the total power quantities
Combined phase power measurements
All Classic combined phase power measurements are identical with Modern combined phase power
measurement. See 5.1.5 section Combined phase power measurements for details.
Total Vector combined power measurements
Standard compliance: IEC 61557-12 Annex A and IEEE STD 1459-2010 Section 3.2.2.6
Total Vector combined (fundamental + nonfundamental) active, nonactive and apparent power and
total power factor are calculated according to the following equation:
To Next Page
Loading...
