7 About Reports
HEAT OF ADSORPTION REPORT
Reports > Heat of Adsorption
Use to select sample files, define quantities, and generate a Heat of Adsorption report. The
isosteric heat of adsorption is an important parameter for characterizing the surface heterogeneity
and for providing information about the adsorbent and the adsorption capacity. Multiple adsorption
isotherms are obtained on the same sample using the same adsorptive but at different
temperatures to obtain the heat of adsorption.
Selections Description
Add Samples [button]
Adds a sample file to the table.
Clear Samples [button]
Removes all entries from the table.
Edit Quantities [button]
Specifies the range of surface coverage to include in the report.
Heat of Adsorption Report
7 - 2
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
To Next Page
Loading...
