1 ANALYZER COMPONENTS FOR TRISTAR IIPLUS
Parts and accessories are located on the Micromeritics web page.
FRONT COMPONENTS
A. P0 tube
B. Power indicator light
C. Sample ports
D. Elevator
Component
Description
P
0
tube
For measuring the saturation pressure.
Power indicator
light
Blinks when power is applied to the analyzer; illuminates when the ana-
lysis program is initiated and ready for operation.
Sample ports
For installing up to three sample tubes.
Elevator
Allows placement of the Dewar around the sample and P
0
tubes. The
elevator is raised automatically when the analysis is started and lowers
automatically upon completion. During analysis, the elevator optionally
lowers after the free space measurement to allow evacuation, then is
raised and continues the analysis.
Front Components
1 Analyzer Components for TriStar IIPlus
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
1 - 1
To Next Page
Loading...
