Micromeritics TRISTAR II PLUS User Manual

2 About the Software
SYSTEM AUDIT TRAIL
File >System Audit Trail
Lists the current user, successful and failed application user login attempts, and contains a
description of all the changes made to sample files. Contains an audit trail of all system
initializations, user login attempts, and sample analyses.
UNINSTALL SOFTWARE IN 21CFR11 ENVIRONMENTS
When the software is uninstalled using uninstall.exe, only the files required to run the application
are removed. Parameter files, sample files, reports, calibration files, and data files are not
removed.
To uninstall the software, double-click the uninstall.exe file located in the software installation
directory, then follow the prompts.
To uninstall the Micromeritics Confirm application, the owner of the application
directory and its contents must be set to the account of the administrator that is
removing the application installation. This account must also have permission to
modify the application directory and its contents. This may require modification to the
owner and to the access permissions of the application directory and its contents.
Upon uninstalling the Confirm application, the system administrator should go into
Windows Users and Groups to remove the Confirm users and groups. See the
Confirm Administrator Guide [part number 004-42821-01].
Depending on the network, Windows may not allow the uninstall.exe program to run. If this
happens. follow these steps:
1. In Windows Users and Groups, verify that the current user is not a member of the analyst
group or developer group. If so, remove the user from the group(s). Log OFF, then log back
ON to the computer.
2. In Windows Explorer, in the Confirm installation directory, double-click the uninstall.exe file
to run the uninstall program.
2 - 30
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023

Micromeritics TRISTAR II PLUS Specifications

General

Brand	Micromeritics
Model	TRISTAR II PLUS
Category	Measuring Instruments
Language	English