Micromeritics TRISTAR II PLUS - Selected Report Options; F-Ratio Method Report

F-RATIO METHOD REPORT
The f-Ratio report uses the measured isotherm and normalizes it using a reference isotherm.
Selections
Description
Pressures [button]
Use to select a pressure range for report calculations and points for
exclusion from calculations.
Calculation pressure range. Enter the minimum and maximum
pressures to be used in the pressure table.To exclude a point from
the calculations used to generate the report, select Exclude.
Exclude All.Select to exclude all pressure points in the table.
Include All.Select to include all pressure points in the table.
Reference isotherm
[groupbox]
Browse to select a sample file to use as a reference for the isotherm.
Select a file containing an isotherm measured from a non-porous
sample of the same material as the current sample.
f-RatioReport
f-Ratio Method Report
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
8 - 27