SUMMARY REPORT
The Summary Report for physisorption analyses provides a condensed summary of selected data
results.
In the Pore Volume group box, if Adsorption total or Desorption total is selected, the p/po field is
enabled. Enter the relative pressure used to calculate the total pore volume.
Selections
Description
Item [n] [selection]
Use to enable the first Pass/Fail item. Until the Summary Report is
selected, S A Single-point BET will be displayed by default. When
selected, click Pass/Fail, then select pass/fail criteria options.
Pass/Fail [n]. Click to display the Pass/Fail Options window for
selection of pass/fail criteria.
S A: Single-point BET. Use to enable Pass/Fail [n] in the Item [n]
group box.
Summary Report
Summary Report
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
8 - 49
To Next Page
Loading...
