7 About Reports
MICROACTIVE REPORTS
This feature provides a quick and easy way to investigate and manipulate analysis data using a
variety of reporting methods.
When a sample file with a status of Complete, Analyzing or Entered is opened, a linear plot and
log plot of the data collected during analysis are displayed as well as a summary of the analysis
giving the total pore volume. Numerous reports are accessible from a drop-down menu.
When a report is opened, plots and summary data are displayed, and in some reports certain
parameters (for example, thickness curve type, pore geometry, and interaction parameters) are
also displayed. Plots may be edited by selecting the data points or data point range to be included
in the plots and modifying the parameters. When a report is edited, the results are immediately
reflected in the plots and summary data.
7 - 10
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) ā Sep 2023