7 ABOUT REPORTS
Reports can be generated for data collected on a sample that has completed analysis, collected
on a sample currently being analyzed, or manually entered.
Reports >Start Report
Generates a report on a sample analysis.
Reports >Close Reports
Closes all open reports. This option is unavailable if reports are being generated.
START REPORTS
Reports > Start Report
Starts the selected report. Select a file from the Files list. Ensure the selected file has a status of
either Complete or Analyzing.
7 About Reports
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
7 - 1