SERVICE TEST MODE
Options >Service Test Mode
Service Test Mode is a password protected option used to perform certain service tests with the
assistance of a trained Micromeritics Service Representative. This password is supplied by your
Micromeritics Service Representative.
If a menu item is grayed out, it is usually an indication that Service Test Mode is required.
To exit Service Test Mode, go to Options > Service Test Mode and deselect the Service Test
Mode option or close the application.
OIL-BASED VACUUM PUMP
The Vacuum Pump Guide can be found on the Micromeritics web page (www.micromeritics.com).
PARTS AND ACCESSORIES
Parts and accessories are located on the Micromeritics web page.
Service Test Mode
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
11 - 21
To Next Page
Loading...
