SHOW INSTRUMENT LOG
Unit [n] >Show Instrument Log
In 21CFR11 environments, see Software in 21CFR11 Environments on page2 -
26.
Use to display a log of recent analyses, calibrations, errors, or messages. The information is
logged for a 7-day period for analyses and a 30-day period for messages and calibrations.
Selections Description
Add Log Entry [button]
Use to enter information to appear in the sample log report that can-
not be recorded automatically through the application. Click the but-
ton again to enter multiple log entries.
Analysis/
Calibration/
Message [checkbox]
Select the logs to display.
For fields and buttons not listed in this table, see Common Fields and
Buttons on page2 - 3.
Instrument Log
Show Instrument Log
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
2 - 19