Micromeritics TRISTAR II PLUS User Manual

3 SAMPLE FILES
Option Presentation on page2 - 10
Software in 21CFR11 Environments on page2 - 26
Sample files include the information required by the analyzer to perform analyses and collect data.
A sample file identifies the sample, guides the analysis, specifies report options, and may be
displayed in Advanced, Basic, or Restricted presentation display mode.
A sample file consists of parameter sets; however, parameter sets can also stand alone. A sample
file may be created either before or at the time of analysis.
Parameter files allow for repeated use of parameter sets. For example, if the same analysis
conditions exist for multiple analyses, an Analysis Conditions file containing the recurring
conditions can be created. When the sample file is created, the Analysis Conditions file can be
selected for the analysis conditions. Once it becomes part of the new sample file, the new file can
be edited, as needed, without affecting the original Analysis Conditions file.
The analysis application contains a default method. A method is a template for sample files that
contains the parameters to be used for an analysis. When a new sample file is created, all the
parameters are filled with the values in the default method.
To change the view for the selected window, use the drop-down list at the bottom of
the sample file editor.
3 Sample Files
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
3 - 1

Micromeritics TRISTAR II PLUS Specifications

General

Brand	Micromeritics
Model	TRISTAR II PLUS
Category	Measuring Instruments
Language	English