Installing the Printer and the intelligent Paper Stacker
1-3
– Weight
The printer´s weight is 40 kg (88.18 lbs.) with all consumables included.
The printer and the optional intelligent paper stacker both together weigh 180 lbs
(82 kg).
– Dimensions
Printer Printer incl. Stacker
System
Width
540 mm
21.26 inch
540 mm
21.26 inch
Height 498 mm
19.61 inch
1.225 mm
48.23 inch
Depth 594 mm
23.39 inch
950 mm
37.40 inch
– Accessibility
To facilitate the handling of the printer (and the stacking system) by the operator
the below mentioned distances around the printer should be met minimally.
Note: The intelligent paper stacker is equipped with castors which allow to move the
entire configuration to an empty space in case of maintenance activities.
– Preconditions for Installation
It must be ensured that the floor space where the printer is to be installed does not
exceed the following horizontal inclinations:
S from the front to the rear + 1E
S from the left to the right + 2E
It must be safeguarded that an approved mains voltage wall socket is available
which provides for correct and sufficient current; the mains cord must extend to the
wall socket.
To Next Page
Loading...
