– 3.57 –
Setting value
Sorting : ON, OFF
Auto feed : ON, OFF
Area : 10 to 510 cm
Procedure
1) Push on the [FUNCTION] key anytime, in a
local mode and displayed [SET UP].
2) Push on the [ENTER/HOLD] key.
3) Set the sorting to ON or OFF by pushing on the
jog keys [
] [ ].
Push on the [ENTER/HOLD] key to display the [AUTO
FEED].
• Set the [SORTING] to OFF to return to the step
2) display.
4) Set the sorting to ON or OFF by pushing on the
jog keys [
] [ ].
Push on the [ENTER/HOLD] key to display the AREA func-
tions.
5) Set the AREA functions by pushing on the jog
keys [
] [ ].
Set the value in between the 10 - 5100 cm (10cm unit), or set
to OFF.
6) Push on the [ENTER/HOLD] key.
7) Push the [END] key twice to return to the local
mode
* If changing the set values, the received buffer will be cleared
* If setting the sorting function to ON, the received buffer size is to be 1MB.
SORTING < ent >
SET UP <ENT>
SORTING < ent >
SORTING : ON
AUTO FEED : ON
AREA : 10cm
FUNCTION
To Next Page
Loading...
Need help?
General
