A5/A3™ Operating Instructions 046-003777-00 9 - 9
Product Specifications Pneumatic Specifications
9.7 Pneumatic Specifications
9.7.1 Pipeline Supply (N
2
O, Air, O
2
)
9.7.2 Cylinder Supply (N
2
O, Air, O
2
)
9.7.3 Vaporizer Connections
9.7.4 Drive Gas
O
2
9.7.5 N
2
O Automatic Cutoff
An N
2
O automatic cutoff stops the flow of N
2
O when O
2
flow is less than 200 ml/min.
Pipeline Input Pressure Range: N
2
O: 280 to 600 kPa (40 to 87 psi)
Air: 280 to 600 kPa (40 to 87 psi)
O
2
: 280 to 600 kPa (40 to 87 psi)
Pipeline Input Flow Rate Range: O
2
: Max. 190 L/min (Including maximum drive gas flow rate,
maximum flow rate to seal PEEP valve, maximum O
2
Flow
meter and maximum O
2
flush)
Air: Max. 20 L/min
N
2
O: Max. 20 L/min
Pipeline Connections: DISS threaded body as per CGA V-5
Gas Configuration: N
2
O, Air, O
2
TABLE 9-9 Pipeline Supply
Cylinder Supply: E-cylinder (American style) and pin indexed
per CGA V-1
O
2
Cylinder Input Pressure Range: 6.9 to 15.5 MPa (1000 to 2250 psi)
N
2
O Cylinder Input Pressure Range: 4.2 to 6 MPa (600 to 870 psi)
Air Cylinder Input Pressure Range: 6.9 to 15.5 MPa (1000 to 2250 psi)
Cylinder Input Flow Rate Range: O
2
: Max. 190 L/min (Including maximum drive gas flow rate,
maximum flow rate to seal PEEP valve, maximum O
2
Flow
meter and maximum O
2
flush)
Air: Max. 20 L/min
N
2
O: Max. 20 L/min
Cylinder Connections: Pin-Index Safety System (PISS)
Yoke Configuration: N
2
O, Air, O
2
TABLE 9-10 Cylinder Supply
Vaporizer Positions: Two vaporizer mount or three vaporizer mount.
Vaporizer Parking Mount: Inactive, for storage only (A5 only)
Mounting Mode:
SELECTATEC®, with interlocking function (SELECTATEC® is
registered trademark of Datex-Ohmeda Inc.)
TABLE 9-11 Vaporizer Connections