Mindray A5 - Demographics Tab

Demographics Tab System Interface
3 - 20 046-003777-00 A5/A3™ Operating Instructions
3.6 Demographics Tab
The Demographics tab is located on the main screen next to the Waveforms tab on the A3 system,
and next to the Spirometry tab on the A5 system (see FIGURE 3-23). The Demographics tab contains
editable fields to enter patient and hospital data (see TABLE 3-2).
NOTE: Facility data should be entered when first setting up the
machine. After entering facility data, the user should go to the
System tab > Manage Defaults > Save as O.R. Defaults so that
the data is not erased in case of power cycle or end of case.
FIGURE 3-23 Demographics Tab
EDITABLE FIELD COMMENT
Patient ID Enter up to 30 characters per field. These fields are cleared when the case has
ended or if the A5/A3 is power cycled.
First Name
Last Name
DOB (Date Of Birth) Enter the information from the virtual keypad. If the input is outside the
accepted range, a prompt message is displayed. If the age of the patient is less
than 1, the Age will display < 1. These fields are cleared when the case has
ended or if the A5/A3 is power cycled.
Age
Weight (lbs/kg)
Bed Enter up to 20 characters per field. When the Restore default settings checkbox
is selected, these fields are NOT cleared when the case has ended (applies to
software bundle version 02.02.00 and later).
Room
Point of Care
Facility
TABLE 3-2 Demographic Tab Fields for Patient and Hospital Data
Demographics Tab