Mindray A5 - Disclaimers; Phone Numbers and How to Get Assistance; Manufacturers Responsibility; Manufacturer and Address

Introduction Disclaimers
xx 046-003777-00 A5/A3™ Operating Instructions
A condition of this warranty is that this equipment or any accessories which are claimed to be
defective be returned when authorized, freight prepaid to Mindray DS USA, Inc., Mahwah, New Jersey
07430. Mindray DS USA, Inc. shall not have any responsibility in the event of loss or damage in transit.
Disclaimers
Product Improvements — Mindray DS USA, Inc. retains the right to modify the machine and/or
operating instructions without prior notification. These operating instructions explain all features of
the A5/A3 System and are correct at time of manufacture. Instructions and models produced at a
later stage, may contain improvements or modifications that were not included in previous models.
Phone Numbers and How To Get Assistance
A network of service representatives and factory-trained distributors is available. Prior to requesting
service, perform a complete operational check of the instrument to verify proper control settings. If
operational problems continue to exist, contact the Service Department at 877.913.9663 (toll free) for
Technical Support or 650.316.3199 (outside North America) for assistance in determining the nearest
field service location.
Please include the instrument model number, the serial number (located on the back of the A5/A3),
and a description of the problem with all requests for service.
Warranty questions should be directed to a local representative. A list of offices, along with their
phone numbers, is provided at the end of this manual.
NOTE: Upon request, calibration instructions or other information will be
provided to assist the user’s appropriately qualified technical
personnel in repairing those parts of the A5/A3 which are designated as
repairable.
Manufacturer’s Responsibility
The effects on safety, reliability, and performance of the equipment are the manufacturer’s
responsibility only if:
a. assembly operations, extensions, readjustments, modifications or repairs are carried out
by authorized personnel; and
b. the electrical installation of the relevant room complies with the appropriate
requirements; and
c. the equipment is used in accordance with the instructions for use
Manufacturer and Address
Manufacturer: Shenzhen Mindray Bio-Medical Electronics Co., Ltd.
Address:
Mindray Building, Keji 12th Road South, High-tech industrial park, Nanshan,
Shenzhen 518057, P.R. China