Mindray A5 - Display Tab

Display Tab System Interface
3 - 34 046-003777-00 A5/A3™ Operating Instructions
3.12 Display Tab
The Display tab provides access to screen cleaning, screen calibration, pressure parameter display,
CO2 waveform placement, gas scales, waveform display, screen brightness and key click volume (see
FIGURE 3-41).
Screen Brightness
To adjust the screen brightness:
1. Select Setup softkey > Display tab (See FIGURE 3-41).
2. In the Screen Brightness area, select the +/- buttons to adjust the screen brightness.
3. Select the Accept button to confirm the change, or select Cancel button to discard the
change.
FIGURE 3-41 A5/A3 Display Tab> Screen Brightness Area
Select the +/- buttons to
adjust screen brightness.