Mindray A5 - Date and Time

A5/A3™ Operating Instructions 046-003777-00 3 - 9
System Interface System Information Header
3.2.5 Date and Time
Displays the current system date and time (see FIGURE 3-11).
FIGURE 3-11 Date and Time Icon (with AG module connected)
To adjust the date and time:
1. Select the Date and Time icon. The Date/Time dialog is displayed (see FIGURE 3-12).
2. Use the dialog keypad and softkeys to adjust the date, time, 12/24 hour format, date format,
and daylight savings time.
NOTE: If applicable, select Daylight Savings Time first before all other
settings.
NOTE: If the Daylight Savings Time On/Off button in the Date/Time
dialog (see FIGURE3-12) is disabled and cannot be selected, it
is because the Daylight Savings setting has been set to Auto in
the System settings (see TABLE3-10, “System Tab Settings,” on
page39).
3. Select the “Accept” to finalize your changes.
FIGURE 3-12 Date and Time Menu
Date and Time