Mindray A5 Operating Instructions

A5/A3™ Operating Instructions 046-003777-00 C - 13
Parameters and Factory Defaults Linked Ventilation Parameter
C.8 Linked Ventilation Parameter
The table below lists how parameter values are affected when changing ventilation modes. For
example, ventilation modes that share the same parameters may also share the same parameter
values when changing from one ventilation mode to the other. Other parameters may have their
values set differently when changing ventilation modes.
CURRENT
VENTILATION MODE &
PARAMETERS
AFFECTED
PREVIOUS VENTILATION MODE
VCV SIMV-VC PCV SIMV-PC PS
VCV Vt — * Measured Vt
or last value
* *
Rate — * * * *
I:E — * * * *
Tpause — * * * *
PEEP — * * * *
Plimit — * * * *
SIMV-VC Vt * — Measured Vt
or last value
* *
Rate * — * * *
Tinsp * — * * *
Tpause * — * * *
PEEP * — * * *
Plimit * — * * *
PS * — * * PS = On
ΔP * — * * *
Trigger * — * * *
Tslope * — * * *
PCV VtG*** * * — * *
Pinsp PLAT
or 80% PEAK
or last value
* — * *
Rate * * — * *
I:E * * — * *
PEEP * * — * *
PlimVG*** If VtG=OFF,
then Pinsp.
If VtG is a
value, then
last value of
PlimVG.
If VtG=OFF,
then Pinsp.
If VtG is a
value, then
last value of
PlimVG.
— If VtG=OFF,
then Pinsp.
If VtG is a
value, then
last value
of PlimVG.
If VtG=OFF,
then Pinsp.
If VtG is a
value, then
last value of
PlimVG.
Tslope * * — * *
* The parameter value is shared between the previous and current ventilation modes.
*** Available on A5 only.

Mindray A5 Specifications

General

Type	Anesthesia Machine
Brand	Mindray
Model	A5
Power Supply	100-240 V AC, 50/60 Hz
Ventilation Modes	SIMV, PSV
Flowmeters	O2, N2O, Air
Vaporizer Capacity	Up to 3 vaporizers
Safety Features	O2 failure protection, low pressure alarm
Gas Module	Optional integrated gas module
Integrated Air Compressor	Optional
Patient Monitoring	Integrated monitoring with optional modules