Mindray A5 Operating Instructions

Linked Ventilation Parameter Parameters and Factory Defaults
C - 14 046-003777-00 A5/A3™ Operating Instructions
SIMV-
PC***
Pinsp PLAT
or 80% PEAK
or last value
* * — *
Rate * * * — *
Tinsp * * * — *
PS * * * — PS = On
ΔP * * * — *
Trigger * * * — *
PEEP * * * — *
Tslope * * * — *
PS Min Rate * * * * —
ΔP * * * * —
Trigger * * * * —
Peep * * * * —
Tslope * * * * —
Apnea Ti * * * * —
CURRENT
VENTILATION MODE &
PARAMETERS
AFFECTED
PREVIOUS VENTILATION MODE
VCV
SIMV-VC PCV SIMV-PC PS
* The parameter value is shared between the previous and current ventilation modes.
*** Available on A5 only.

Mindray A5 Specifications

General

Type	Anesthesia Machine
Brand	Mindray
Model	A5
Power Supply	100-240 V AC, 50/60 Hz
Ventilation Modes	SIMV, PSV
Flowmeters	O2, N2O, Air
Vaporizer Capacity	Up to 3 vaporizers
Safety Features	O2 failure protection, low pressure alarm
Gas Module	Optional integrated gas module
Integrated Air Compressor	Optional
Patient Monitoring	Integrated monitoring with optional modules