17-2
A time indicating your current position is displayed above the parameter area. Numeric measurement values
corresponding to the cursor location change as the cursor is moved. The measurement value that triggered high
level alarm has red background. The one that triggered medium/low level alarm has yellow background.
By selecting or beside [Event], you can position the cursor to different event time.
By selecting the [Print] button, you can set and print out the graphic trends report by the printer. For how to set
the graphic trends report, please refer to
NOTE
The scales of the graphic trends restore to auto adjustment when you discharge a patient, change a unit or
restart the monitor.
Only the scales of Resp, ECG, SpO
2
, Temp, IBP and NIBP support manual adjustment.
17.3 Reviewing Tabular Trends
In the [Review] menu, select [Tabular Trends] to access the following window.
Events are marked with colors in window’s top area. Red represents high level alarm event. Yellow represents
medium/low level alarm event. Green represents manual event.
In this review window:
Select [Trend Group] and you can select a trend group for viewing in the popup menu. If [Custom 1] or [Custom 2]
is selected, you can further select [Define Trend Group]. Then you can select the parameters for viewing in the
popup menu.
You can change the resolution of the trend data by selecting [Interval] and then selecting the appropriate setting:
[5 s] or [30 s]: select to view up to 4 hours of tabular trends at 5- or 30-second resolution.
[1 min], [5 min], [10 min], [15 min], [30 min], [1 h], [2 h] or [3 h]: select to view up to 120 hours of tabular
trends at your selected resolution.
[NIBP]: select to view the tabular trends when NIBP measurements were acquired.
19 Printing.
To Next Page
Loading...
