Mindray BeneView T1 User Manual

4-4
4.4 Understanding the Big Numerics Screen
To enter the big numerics screen:
1. Select [Main Menu]→[Screen Setup >>]→[Screen Layout >>].
2. In the [Choose Screen] tab, select [Big Numerics].
You can select your desired parameters to display in this screen: in the [Screens] menu select [Big Numerics Screen
Setup] and then select the parameters you want. For parameters having a waveform, the waveform will not be
displayed.
4.5 Viewing Minitrends (only available for the external display)
4.5.1 Having a Split-Screen View of Minitrends
You can split the normal screen so that one part of the screen, on the left hand side, continuously shows graphic
minitrends beside waveforms as shown in the figure below.
To have a split-screen view of minitrends, you can select [Main Menu]→[Screen Setup >>]→[Screen Layout >>]→
[Choose Screen]→[Minitrends Screen]→
.
The split-screen view provides minitrends for multiple parameters. In each field, the label and scale are respectively
displayed at the top and left. The time is displayed at the bottom of the minitrends view.
Minitrend View

Mindray BeneView T1 Specifications

General

Brand	Mindray
Model	BeneView T1
Category	Medical Equipment
Language	English