5-3
5.5 Querying from Local Facility
You can query the patient information from either the local facility or all networked facilities. To set where to query,
follow this procedure:
1. Select [Main Menu]→[Maintenance >>]→[User Maintenance >>]→enter the required password→[Network
Setup >>]→[Gateway Comm Setup >>].
2. Set [Query From Local Facility].
Select [Yes] to query only from local facility.
Select [No] to query from all networked facilities.
5.6 Associating Patient Information
After associating patient information with HIS, the monitor will automatically update patient information if
corresponding information in HIS has been changed. The monitor can associate patient’s MRN, visit number, first
name, last name, date of birth, and gender with HIS.
NOTE
A keyword takes effect only when being defined in eGateway. Refer to eGateway Integration Manager
Installation Guide for details.
The monitor displays corresponding patient information only when all the keywords have been inputted.
5.7 Editing Patient Information
To edit the patient information after a patient has been admitted, or when the patient information is incomplete, or
when you want to change the patient information:
1. Select [Main Menu]→[Patient Setup >>].
2. Select [Patient Demographics]
and then make the required changes.
3. Select [Ok].
You can also input the patient’s visit number in the [Patient Demographics] menu, but the [Visit Number] option
needs to be enabled.
To display the [Visit Number] option in the [Patient Demographics] menu:
1. Select [Main Menu]→[Maintenance >>]→[User Maintenance >>]→enter the required password.
2. Set [Visit Number] to [On >>].
To Next Page
Loading...
Need help?
General
