4-3
4.3.4 Changing Screen Layout
Select [Main Menu]→[Screen Setup >>]→[Screen Layout >>] to enter the [Screens] menu.
You can choose the desired screen type in the [Choose Screen] window.
You can select the parameters and waveforms you want to view in the [Screen Setup] window. For details, please
refer to the section Setting the Screen.
You can select the parameters you want to view on big numerics screen in the [Big Numerics Screen Setup]
window.
You can switch on or off the connected parameter modules in the [Parameters Switch] window. If a parameter
module is switched off, parameter values and waveforms will not display on the screen.
The ECG parameter and the first ECG waveform always display in the first row. The configurable areas can be classified as
Area A and Area B.
In Area A, you can choose to display the parameters (having waveforms) and their waveforms. Each parameter and
the associated waveform are displayed in the same row.
In Area B, you can choose to display all the parameters except ECG. Associated waveforms will not be displayed.
WARNING
The parameters whose positions are not allocated in the [Screen Setup] window will not be displayed.
However, the monitor can still give alarms of these parameters.
Area A
Area B
To Next Page
Loading...
Need help?
General
