22-2
22.2 Cleaning
Your equipment should be cleaned on a regular basis. If there is heavy pollution or lots of dust and sand in your place,
the equipment should be cleaned more frequently. Before cleaning the equipment, consult your hospital’s regulations
for cleaning the equipment.
Recommended cleaning agents are:
Water
Sodium hypochlorite bleach (10%, Sodium hypochlorite)
Hydrogen peroxide (3%)
Ethanol (70%)
Isopropyl alcohol (70%)
1-Propanol (50%)
Virkon
Descosept forte
Descosept AF
Dismozon® plus
Mikrozid® AF liquid
Terralin Liquid
Perform® classic concentrateOXY (KHSO
4
solution)
To clean your equipment, follow these rules:
1. Shut down the patient monitor and disconnect it from the power line.
2. Clean the display screen using a soft, clean cloth dampened with a glass cleaner.
3. Clean the exterior surface of the equipment using a soft cloth dampened with the cleaner.
4. Wipe off all the cleaning solution with a dry cloth after cleaning if necessary.
5. Dry your equipment in a ventilated, cool place.
22.3 Disinfecting
Disinfect the equipment as required in your hospital’s servicing schedule. Cleaning equipment before disinfecting is
recommended.
22.4 Sterilization
Sterilization is not recommended for this monitor, related products, accessories, or supplies unless otherwise indicated
in the Instructions for Use that accompany the products, accessories or supplies.
To Next Page
Loading...
Need help?
General
