Mindray BeneView T1 User Manual

18-1
18 Calculations
18.1 Introduction
The calculation feature is available with your patient monitor. The calculated values, which are not directly measured,
are computed based on the values you provide.
Your can perform the following calculations:
 Dose calculations
 Oxygenation calculations
 Ventilation calculations
 Hemodynamic calculations
 Renal calculations
To perform a calculation, select [Main Menu] → [Calc >>], or the [Calculations] QuickKey and then select the
calculation you want to perform.
NOTE
 The calculation feature is independent of other monitoring functions and can be therefore used for patients
being monitored by other monitors. Any operation in a calculation window does not affect the patient
monitoring by the local patient monitor.
WARNING
 After the calculation is finished, verify the entered values are correct and the calculated values are
appropriate. We assume no responsibility for any consequences caused by wrong entries and improper
operations.

Mindray BeneView T1 Specifications

General

Brand	Mindray
Model	BeneView T1
Category	Medical Equipment
Language	English