4-2
4.3 Tailoring Your Screens
You can tailor your patient monitor’s screens by setting:
Waveform sweep mode
Wave line size
The color in which each measurement’s numerics and waveform are displayed
The parameter to be monitored.
Changing some settings may be hazardous. Therefore, those setting are password-protected and can be modified by
authorized personnel only. Once change is made, those who use the patient monitor should be notified.
4.3.1 Changing the Wave Line Size
1. Select [Main Menu]→[Maintenance >>]→[User Maintenance >>]→enter the required password.
2. Select [Others >>].
3. Select [Wave Line] and toggle between [Thick], [Mediate] and [Thin].
4.3.2 Changing Measurement Colors
1. Select [Main Menu]→[Screen Setup >>]→[Measurement Color Setup >>].
2. Select the color box next to your desired measurement and then select a color from the popup menu.
4.3.3 Choosing a Screen
By selecting [Main Menu]→[Screens]→[Choose Screen], you can choose eithe r of the following screen:
Normal Screen
Big Numerics screen
ECG 7-Lead Full-Screen if 5-lead or 12-lead ECG is selected
ECG 12-Lead Full-Screen if 12-lead ECG is selected
PiCCO Screen if PiCCO module is configured
If the external display is connected, you can also choose:
ECG 7-Lead Half-Screen if 5-lead or 12-lead ECG is selected
Minitrends Screen
OxyCRG Screen
View Others Screen
PAWP Screen
To Next Page
Loading...
Need help?
General
