Mindray BeneView T1 - 19.1 Printer; 19.2 Connecting a printer; 19.3 Setting the Printer

19-1
19 Printing
19.1 Printer
The monitor can output patient reports via a connected printer. So far, the monitor supports the following printer:
 HP LaserJet 1505n
 HP LaserJet P2035n
 HP LaserJet P4015n
 HP LaserJet Pro 400 M401n
 HP LaserJet 600 M602
 HP LaserJet M202DW
The specifications of the reports the monitor prints are:
 Paper: A4, Letter
 Resolution: 300 dpi
For more details about the printer, see the document accompanying the printer. With the upgrading of products, the
monitor will support more printers and no prior notice will be given. If you have any doubt about the printer you have
purchased, contact our company.
19.2 Connecting a printer
To print the reports or the trend data of a patient, you can directly connect the T1 to a printer via the T1 docking station
through the network, and then start printing what you want.
19.3 Setting the Printer
To set the printer’s properties, select [Main Menu]→[Print Setup >>]→[Printer Setup >>]. In the [Printer Setup] menu,
you can:
 Select a connected printer
Select [Printer] and then select a connected printer as the monitor’s printer.
 Search for a printer
If your selected printer is not in the list or a new printer is added into the network, you can select the [Search
Printer] to re-search for all printers in the network.
 Set up the paper size
Select [Paper Size] and toggle between [A4] and [Letter].