17-4
After selecting the desired event, you can select [Details] to access the following window. In this window, the waveform
area displays the waveforms related to the event, and the parameter area displays the parameter values happened at the
event trigger time.
NOTE
Pausing or switching off alarms will not be recorded as events. The time of these operations will not be
recorded in the system log.
Earlier-recorded events might be overwritten by later ones if it reaches capacity.
A total loss of power has no impact on the saved events.
In this window:
You can select or to navigate through the waveforms.
You can select or beside the [Event] button to switch between events.
You can set the desired [Gain] for ECG waveform.
You can set the desired [Sweep].
By selecting the [Events List] button, you can view the events list.
By selecting the [Print] button, you can print out the currently displayed alarm events by the printer.
To Next Page
Loading...
Need help?
General
