20-6
20.4.10.2 Selecting a CMS
If [Select CMS] is enabled, you can select the CMS for the current monitoring.
To select the CMS, select the prompt message area at the bottom of the screen. Then the selected CMS name will
display.
If the CMS you select does not have a name, this area displays “???”.
20.4.10.3 Clearing the Selected CMS at Startup
You can clear the selected CMS each time the monitor restarts after being powered off for more than 2 minutes.
To clear the selected CMS,
1 Select [Main Menu]→[Maintenance>>]→[User Maintenance>>]→enter the required password→[Others >>].
2. Set [Clear CMS IP at startup] to [On]
The selected CMS will not be cleared when only one CMS is configured, or the monitor is restarted within 2 minutes.
This function is switched off by default.
To Next Page
Loading...
Need help?
General
