Mindray BeneView T1 User Manual

B-2
EMISSIONS
CISPR 11
the public low-voltage power supply network that
supplies buildings used for domestic purposes.
Harmonic distortion
IEC 61000-3-2
Class A The device is suitable for use in all establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes.
Voltage fluctuations
and flicker
IEC 61000-3-3
Complies
NOTE
 The device needs special precautions regarding EMC and needs to be installed and put into
service according to the EMC information provided in Annex B.
 Other devices may affect this device even though they meet the requirements of CISPR.
 When the inputted signal is below the minimum amplitude provided in technical
specifications, erroneous measurements could result.
 The EMISSIONS characteristics of this device make it suitable for use in industrial areas and
hospitals (CISPR 11 class A). If it is used in a residential environment (for which CISPR 11 class B
is normally required) this device might not offer adequate protection to radio-frequency
communication services. The user might need to take mitigation measures, such as relocating
or re-orienting the device.
 If the essential performance is lost or degraded, it may be necessary to take mitigation
measures, such as re-orienting or relocating the ME EQUIPMENT or ME SYSTEM or shielding the
location or stopping using the monitor and contact the service personnel.
If the device is operated within the electromagnetic environment listed in Table Guidance and Declaration
—Electromagnetic Immunity, the system will remain safe and provide the following essential performance:
■ Operating mode
■ Accuracy
■ Function
■ Accessories identification
■ Data stored
■ Alarm
■ Detect for connection

Mindray BeneView T1 Specifications

General

Brand	Mindray
Model	BeneView T1
Category	Medical Equipment
Language	English