Image Optimization 5-51
4. Select the reference image.
5. Confirm if the section planes displayed are the target planes, if not, re-select the
reference image again.
6. Observe the interested structure through multiple slices.
Select the proper image layout and space according to the size of the target structure.
7. Optimize the section plane by the post-process parameters.
To observe the details or the tiny part of the interested region, do image zooming
please.
8. Rotate the 3D image to observe the section planes of other orientations. Repeat step
6 if necessary.
If the target orientation and region can’t be observed even after image rotation and
shifting, click [Reset Ori.] to reset the 3D image.
9. Do operations like comment to the interested region.
10. Save the image.
11. Press <Update> to return to 4D imaging preparation status.
5.10.6.2 iPage Basic Functions and Operations
iPage Monitor Display Tour
To Next Page
Loading...
Need help?
General
