Patient Data Management 10-17
(2) Select the user name in the drop-down list of User Name.
(3) Enter password and click [Login].
To change user:
(1) To log out the current user and change to another user, click
at the lower right
corner of the screen to pop up the following dialogue box:
(2) Click [Change User] to pop up the Login dialogue box.
(3) Enter the user name and password in the field box.
NOTE: You have to exit the Preset screen before changing the user.
Lock the system
(1) Click the
at the lower right corner of the screen to pop up the dialogue box.
(2) Select [Lock Machine], and the system is locked; you have to log on before using
the system.
10.8.4 Add/ Delete a User
The system administrator can add and delete a user, while the operator can’t.
Add a User
Premise: you must log on the system as the system administrator. If not, you will be
required to enter administrator name and password before the setting.
1. Open the “Admin” page through the path: [Setup]→[System Preset]→[Admin].
2. Click [Add] to pop up the following dialogue box.
To Next Page
Loading...
Need help?
General
