17-4 System Maintenance
îš„ Clean dust-proof covers
z Tool: Soft brush
z Method:
1) Disassemble dust-proof cover before cleaning.
System dust-proof cover: Grab the lower side of the dust net frame, and then pull out
the net.
Probe port dust-proof cover: there is a probe port dust-proof cover at the front of the
system, Pull it out.
2) Cleaning: with soft brush and then wipe off the dust.
3) Assemble dust-proof covers.
Input the dust-proof clasp into the slot of the main unit, push the dust-proof inward
until the dust-proof clasp is blocked in the slot.
CAUTION:
Please clean all dust-proof covers of the system periodically
(1 time per month); otherwise, system damage may result.
Cleaning times can be increased when the system is used in
the open air or somewhere dust is more.
17.1.2 Clean the Peripherals
Do the cleaning maintenance according to your actual peripheral configuration; items
which are not configured can be skipped.
Content Description
Color and
B/W video
printer
First wipe off dust or stain attached to the cover of printer with soft dry
cloth, then clean the inside of printer. Be sure to do the cleaning
maintenance according to the operation manual if is necessary.
Top cover notch
Clamping ring click
Dust-proof
Main unit
To Next Page
Loading...
Need help?
General
