DICOM 11-11
(3) When finished the presets, you can perform image scanning, each time you press <End
Exam> on the control panel, the system will send the image to the default DICOM print
server for printing.
11.3.3 DICOM Worklist
After successfully connected DICOM Worklist server with ultrasound system, you can query patient
records from Worklist server, and then import the desired information to your system.
îš„ To query patient information via Worklist server
(1) Press the < Patient > key to open the Patient Info screen.
(2) Click [Worklist] to enter the Worklist page.
(3) Query patient information:
a) Set query criteria among Patient ID, Patient Name, Accession #, Search Key,
Scheduled Station AE Title, Worklist Server or Exam Date. The default exam date is
the current date.
b) Click [Query].
c) The scheduled patients, which meet the criteria, are displayed in the lower part of the
screen.
d) After you finished the first query, you can perform the second query basing on the
previous results. The scheduled patients in the list will update in real time.
(4) Select the desired patient record in the displayed patient list:
a) Select the desired patient and click [Start Exam], the patient information is imported
into the system and then an exam is started.
b) Click [Transfer], the patient information is imported into the [Patient Info] screen. After
you edited the patient information in the Patient Info screen, select [OK] to start a new
exam.
(5) To show patient information in details:
To Next Page
Loading...
Need help?
General
